Last checked
May 12, 2026
We checked the page logic, support notes, and related links on this page.
Concrete Estimating
Estimate post-hole concrete with less guesswork
Post-hole jobs often fail on underestimation because holes vary in practice.
How to use it
Planning before buying
Use this guide for a planning check, then confirm the final order or quote against live product data and site conditions.
Why trust it
See how the site is maintained
Read the calculator methodology and editorial policy for the standards behind these pages.
Quick answer
Work out concrete needs for fence posts and similar jobs. Use it with the Concrete Calculator and related guides to pressure-test the estimate before you buy or request quotes.
When this guide helps
Useful for shed bases, footing trenches, fence posts, and quick checks before ordering mixes.
Watch most
The most common mistakes are mixing up depth units, forgetting overbreak, and ignoring uneven excavation.
Best next move
Measure carefully, sense-check the result, and compare buying routes before you commit.
Use the calculator first
The quickest path is to start with Concrete Calculator, then use this guide to sense-check the result and decide what to buy or ask for next.
What this page isolates
Useful for shed bases, footing trenches, fence posts, and quick checks before ordering mixes.
Key assumption
Assumes simple shapes, typical ordering practice, and a clear volume estimate before ordering ready-mix or bagged concrete.
Common mistake to avoid
The most common mistakes are mixing up depth units, forgetting overbreak, and ignoring uneven excavation.
Trade-offs to compare
These are the practical choices that usually matter more than a neat headline answer.
Lower waste vs easier install
The most efficient buying route is not always the easiest route to install or live with on site.
Small overbuy vs shortfall risk
A modest spare allowance can be cheaper than a delayed job, second delivery, or hard-to-match top-up order.
Clean maths vs supplier reality
Always compare the neat result against live pack sizes, stock lengths, and merchant terms before you treat it as final.
Worked examples and scenario checks
Use these examples to see where the simple answer often needs a second look.
Measurement check
Remeasure the parts of the job that feel least certain before you rely on the first estimate.
Supplier check
Compare live pack sizes, product sheets, and merchant wording against the assumptions used here.
Decision check
Treat the calculator and guide together as a planning baseline, not a substitute for a real quote.
Practical checks before you buy or brief
Use these prompts to move from a neat guide answer into a cleaner real-world decision.
- Confirm the real product yield, pack size, stock length, or buying format before you order.
- Check whether waste, awkward cuts, and spare stock justify rounding up further.
- Use the linked calculator and project hub together if the decision affects more than one material or layer.
Related decision pages
Use these pages to pressure-test the next buying, waste, or cost question that usually follows the first estimate.
Concrete Volume Guide
Understand cubic metres, cubic feet, and practical buying margins for concrete orders.
Concrete for Slab Calculator
Estimate slab concrete volume with length, width, depth, and waste guidance.
Ready-Mix vs Bagged Concrete
Compare ready-mix and bagged concrete for small and medium jobs.
Next step links
Open the full Concrete Estimating project hub or go straight to the Concrete Calculator.
Ready to turn this guide into a quote request?
Once you understand the assumptions and buying choices, send builders or merchants the same measured scope so the prices are easier to compare fairly.
- Confirm what the quote should include: materials only, labour only, or both.
- State access, finish level, timing, and any unknowns clearly.
- Ask each supplier or installer to price the same scope and exclusions.
You can also open the wider Concrete Estimating project hub if the quote depends on more than one material.
How should I use Concrete for Post Holes Calculator?
Use it with the Concrete Calculator as a buying and planning sense-check, then confirm the final order against live supplier information and the site conditions.
What usually changes the Concrete for Post Holes Calculator answer most?
Coverage or stock assumptions, waste, awkward cuts, and whole-unit rounding usually move the final order more than people expect.
Should I round up the result?
Usually yes. A small spare allowance is often cheaper than a shortfall, a second delivery, or a delayed job.