Last checked
May 12, 2026
We checked the page logic, support notes, and related links on this page.
Trim run tool
Architrave Calculator
Estimate architrave lengths and rough cost for doors and openings.
Run + stock lengthsRounding bufferBuying checks
How to use it
Planning before buying
Use this calculator for a planning check, then confirm the final order or quote against live product data and site conditions.
Why trust it
See how the site is maintained
Read the calculator methodology and editorial policy for the standards behind these pages.
Planning summary
Quick answer
Best for turning a clean run into a stock-length order with a more realistic allowance for cuts and joins.
Planning summary
Watch most
Common misses include forgetting joints, corners, mitres, end conditions, and the waste created when standard stock lengths do not divide neatly into the run.
Planning summary
Best next move
Measure the full run, add realistic waste for cuts and joints, then check whether fittings and corners need to be costed separately.
Recently used calculators
Pick up from the calculators you used recently on this device.
Quote-ready brief
Use these actions to turn the live calculator result into a cleaner request for builders, suppliers, or merchants.
Run the calculator, then use these actions to prepare the estimate for a real quote request.
Need help deciding what to ask for? Read the quote checklist or contact the team at hello@buildcostlab.com.
Practical checks before you buy
These notes are where BuildCostLab goes beyond a generic calculator result by surfacing the assumptions, buying traps, and next decisions that usually move the real order.
What this estimate includes
The total run, waste or cutting allowance, whole stock-length rounding, and a rough material spend when a price is entered.
What it may not include
Corners, fittings, trims, labour, and awkward site details that may need their own count outside the clean run length.
Key assumptions
Linear calculators assume materials are bought in stock lengths and the job can be reduced to a total run with a reasonable cut allowance.
Worked example
Example: an 18m run with 8 percent waste becomes 19.44m of planned coverage. If lengths are sold in 2.4m pieces, the safer order is 9 lengths rather than 8.1 on paper.
How this estimate is worked out
We measure the total run, add the waste allowance, then convert the adjusted run into whole stock lengths using the selected piece length.
What assumptions sit underneath it
Linear calculators assume materials are bought in stock lengths and the job can be reduced to a total run with a reasonable cut allowance.
How rounding is handled
Because trims, pipes, and stock lengths are bought in whole pieces, the final answer rounds up to a real ordering total and shows the buffer created by that rounding.
What changes the result most
Corners, joints, fittings, waste from stock lengths, and awkward end conditions often change the final order more than the clean run length.
When this estimate breaks
Check again when the run includes mitres, several branches, unusual fittings, or hidden details that are not covered by a single straight-line measurement.
Practical buying checks
Confirm stock lengths, accessory counts, fixing method, and whether one extra length is cheaper than a return trip or delayed install.
Quote-ready checklist
Use these prompts when you want to turn the estimate into a clearer builder, installer, or merchant request.
- Share the total run, the number of corners or fittings, and the preferred stock length if you know it.
- Ask whether fixings, trims, connectors, and waste from offcuts are included.
- Confirm whether the job needs one clean install or a small spare allowance for mistakes and future repairs.
Explore this project hub
Open the full Trim and Joinery Estimating project hub to move from quick estimate to deeper guidance.
Related calculators in the same project hub
Use these linked tools when the estimate crosses into another calculator in the Trim and Joinery Estimating cluster rather than stopping at one isolated material number.
Coving Calculator
Estimate coving lengths, whole pieces, and ceiling-perimeter buying quantities before you order lightweight or plaster coving.
Skirting Board Calculator
Estimate skirting board lengths, whole boards, and room-perimeter buying quantities before you order MDF, pine, or primed skirting.
Quick answers
These answers are designed to resolve the last practical buying questions people usually have after running the calculator.
How do I use the Architrave Calculator?
Enter the total run, stock length, and a realistic waste setting, then use this calculator to plan the buying quantity before you check joins, fittings, and extra detail pieces.
What changes the Architrave Calculator estimate most?
The biggest drivers are the measured run, the stock length, and the extra waste created by cuts, corners, joints, and awkward end details.
Should I round the result up?
A slightly higher stock-length overage is often cheaper than losing time to a short final piece or making an extra delivery run.
Use this estimate in a quote request
Copy the estimate, add your own notes, and send the same scope to each builder or supplier so the quotes are easier to compare.
- Confirm what the quote should include: materials only, labour only, or both.
- State access, finish level, timing, and any unknowns clearly.
- Ask each supplier or installer to price the same scope and exclusions.
You can also open the wider Trim and Joinery Estimating project hub if the quote depends on more than one material.